TP Chipper TP175 PTO Tractor mounted 6" Wood Chipper with No Stress
Infeed section
Operation: Horizontal funnel with yellow safety bar for forward, return and stop of feed rollers
Infeed opening, height: 175 mm
Infeed opening, width: 220 mm
Funnel opening, height (inside measure): 886 mm
Funnel opening, width (inside measure): 860 mm
Infeed position: Parallel to driving direction
Feed rollers: 2 Feed roller position: Horizontal
Feed roller diameter: 180 mm
Feed roller pretension: 1 spring 8 mm
Feed roller drive: 2 x hydraulic in series
Hydraulic oil capacity: 18 litres
Infeed speed (maximum): 24 m/min I
ntegrated hydraulic system: Yes
Hydraulic pump: Fixed gearwheel pump
Bio-degradable hydraulic oil: Optional
Chipping system
Chipping principle: Disc chipper
Chipping angle: 90 degrees
TP OPTICUT: Yes
TP TWIN DISC: Yes
Number of blades/knives: 4
Cuts per round: 2
Blade/Knive gauge - minimum: 12 mm
Blade/Knive gauge - maximum: 12 mm
Rotor speed: 1000 rpm
Rotor diameter: 660 mm
Rotor weight: 87 kg
Transmission: Direct
Anvil/counter knife - horizontal: 1 reversible (Hardox)
Anvil/counter knife - vertical: 2 (Hardox)
Replaceable tub plate: No
Sliver breakers: No
TP CHIP KIT: Optional Tub plate: Yes
Tractor mounting
PTO 1000 rotations per minute: Yes
PTO 540 rotations per minute: Optional
3-point linkage: Cat. 1 + 2
PTO shaft: Included, with free-wheel
PTO rotations per minute: 1000 rpm
Hydraulic outlets: No DA
Front mounting - PTO 1000 rotations per minute: Optional
Discharge system
Standard discharge spout: Turnable
Rotation of discharge spout: 270 degrees
Vertical extended spout 0,35m: No
Extended spout 0,3m: No Hinged discharge spout: No
Horizontal extended spout 1,0m: Optional
Horizontal extended spout 1,5m: No
Hydraulic turn of spout incl. Spout: No
Vertical extended spout 0,5m: Optional
No-stress control
No-stress control: TP PILOT - Optional
Displays feed roller rotations: Optional
Displays rotor rotations: Optional
Timer for work hours (can be reset): Optional
Timer for total work hours: Optional
Accessories/Upgrades
TP WINCH: No
TP PILOT: Recommended if the tractor has less than 60 hp
Horizontal extended spout 1,0 m: For longer distance output
Vertical extended spout 0,5 m: Tube with 2 flanges
Magnetic light set: Rear light
Trailer hitch for twin axle trailer: Max. 500 kg. vertical pressure
Speed-up gear (540 to 1000 rpm): Increases the tractor rpm from 540 to 1000 rpm
Turning gear: For front mounting
TP CHIP KIT: For uniform biomass chip quality: Sliver breakers type A with 4-fingers (max. opening = 33 x 43 mm) and cover inside upper routing house
Bio oil: Strong and bio-degradable "saturated ester" hydraulics oil
Photos are for illustration proposes only. Prices include VAT, exclude any dealer installation and/or freight charges. Freight is ex-Ballydooley, Roscommon Co Roscommon F42DD74. JF Hanley Groundcare reserves the right to change recommended price, design and/or specifications without notice. Errors and omissions excepted.
TP Chipper TP175 PTO Tractor mounted 6" Wood Chipper with No Stress
*Please Note while we normally stock this item, due to the different options available the exact spec you wish to order may not always be in stock. If we receive an order we will immediately contact you to inform you if the item is available for immediate dispatch or if it need to be ordered into stock before it can be dispatched. If not in stock please allow 5-7 business days for it to come into stock once ordered.
