top of page

TO Chipper TP130 PTO Tractor mounted 6" Chipper with Stress Relief


Infeed section

Operation: Horizontal funnel with yellow safety bar for forward, return and stop of feed rollers

Infeed opening, height: 130 mm

Infeed opening, width: 220 mm

Funnel opening, height (inside measure): 886 mm

Funnel opening, width (inside measure): 860 mm

Infeed position: Parallel to driving direction

Feed rollers: 1

Feed roller position: Horizontal

Feed roller diameter: 220 mm

Feed roller pretension: 1 spring 8 mm

Feed roller drive: 1 hydraulic

Hydraulic oil capacity: 20 litres

Infeed speed (maximum): 16 m/min

Integrated hydraulic system: Yes

Hydraulic pump: Fixed gearwheel pump

Bio-degradable hydraulic oil: Optional

Chipping system

Chipping principle: Disc chipper

Chipping angle: 90 degrees

TP OPTICUT: No TP TWIN DISC: Yes Number of blades/knives: 2

Cuts per round: 2

Blade/Knive gauge - minimum: 8 mm

Blade/Knive gauge - maximum: 8 mm

Rotor speed: 1000 rpm Rotor diameter: 660 mm

Rotor weight: 82 kg

Transmission: Gearbox

Anvil/counter knife - horizontal: 1 reversible (Hardox)

Anvil/counter knife - vertical: 1 (Hardox)

Replaceable tub plate: No

Sliver breakers: No

TP CHIP KIT: Optional Tub plate: Yes

Tractor mounting

PTO 1000 rotations per minute: No

PTO 540 rotations per minute: Yes

3-point linkage: Cat. 1 + 2

PTO shaft: Included, with free-wheel

PTO rotations per minute: 540 rpm

Hydraulic outlets: No DA

Front mounting - PTO 1000 rotations per minute: No

Discharge system

Standard discharge spout: Turnable

Rotation of discharge spout: 270 degrees

Vertical extended spout 0,35m: No

Extended spout 0,3m: No

Hinged discharge spout: No

Horizontal extended spout 1,0m: Optional

Horizontal extended spout 1,5m: No

Hydraulic turn of spout incl. Spout: No

Vertical extended spout 0,5m: Optional

No-stress control

No-stress control: TP PILOT - Optional

Displays feed roller rotations: Optional

Displays rotor rotations: Optional

Timer for work hours (can be reset): Optional

Timer for total work hours: Optional


Accessories/Upgrades TP WINCH: No TP PILOT: Recommended if tractor has less than 40 hp Horizontal extended spout 1,0 m: For longer distance output Vertical extended spout 0,5 m: Tube with 2 flanges Magnetic light set: Rear light TP CHIP KIT: For uniform biomass chip quality: Sliver breakers type A with 4-fingers (max. opening = 33 x 43 mm) and cover inside upper routing house Bio oil: Strong and bio-degradable "saturated ester" hydraulics oil


Photos are for illustration proposes only. Prices include VAT, exclude any dealer installation and/or freight charges. Freight is ex-Ballydooley, Roscommon Co Roscommon F42DD74. JF Hanley Groundcare reserves the right to change recommended price, design and/or specifications without notice. Errors and omissions excepted.

TP Chipper TP130 PTO Tractor mounted 6" Wood Chipper with Stress Relief

Sales Tax Included
  • *Please Note while we normally stock this item, due to the different options available the exact spec you wish to order may not always be in stock. If we receive an order we will immediately contact you to inform you if the item is available for immediate dispatch or if it need to be ordered into stock before it can be dispatched. If not in stock please allow 5-7 business days for it to come into stock once ordered.