TP175 PTO Tractor mounted 6" Wood Chipper with No Stress

TP175 PTO Tractor mounted 6" Wood Chipper with No Stress

TP175 PTO

 

TP175 PTO Tractor mounted 6" Wood Chipper with No Stress

 

Infeed section

Operation: Horizontal funnel with yellow safety bar for forward, return and stop of feed rollers

Infeed opening, height: 175 mm

Infeed opening, width: 220 mm

Funnel opening, height (inside measure): 886 mm

Funnel opening, width (inside measure): 860 mm

Infeed position: Parallel to driving direction

Feed rollers: 2 Feed roller position: Horizontal

Feed roller diameter: 180 mm

Feed roller pretension: 1 spring 8 mm

Feed roller drive: 2 x hydraulic in series

Hydraulic oil capacity: 18 litres

Infeed speed (maximum): 24 m/min I

ntegrated hydraulic system: Yes

Hydraulic pump: Fixed gearwheel pump

Bio-degradable hydraulic oil: Optional

Chipping system

Chipping principle: Disc chipper

Chipping angle: 90 degrees

TP OPTICUT: Yes

TP TWIN DISC: Yes

Number of blades/knives: 4

Cuts per round: 2

Blade/Knive gauge - minimum: 12 mm

Blade/Knive gauge - maximum: 12 mm

Rotor speed: 1000 rpm

Rotor diameter: 660 mm

Rotor weight: 87 kg

Transmission: Direct

Anvil/counter knife - horizontal: 1 reversible (Hardox)

Anvil/counter knife - vertical: 2 (Hardox)

Replaceable tub plate: No

Sliver breakers: No

TP CHIP KIT: Optional Tub plate: Yes

Tractor mounting

PTO 1000 rotations per minute: Yes

PTO 540 rotations per minute: Optional

3-point linkage: Cat. 1 + 2

PTO shaft: Included, with free-wheel

PTO rotations per minute: 1000 rpm

Hydraulic outlets: No DA

Front mounting - PTO 1000 rotations per minute: Optional

Discharge system

Standard discharge spout: Turnable

Rotation of discharge spout: 270 degrees

Vertical extended spout 0,35m: No

Extended spout 0,3m: No Hinged discharge spout: No

Horizontal extended spout 1,0m: Optional

Horizontal extended spout 1,5m: No

Hydraulic turn of spout incl. Spout: No

Vertical extended spout 0,5m: Optional

No-stress control

No-stress control: TP PILOT - Optional

Displays feed roller rotations: Optional

Displays rotor rotations: Optional

Timer for work hours (can be reset): Optional

Timer for total work hours: Optional

Accessories/Upgrades

TP WINCH: No

TP PILOT: Recommended if the tractor has less than 60 hp

Horizontal extended spout 1,0 m: For longer distance output

Vertical extended spout 0,5 m: Tube with 2 flanges

Magnetic light set: Rear light

Trailer hitch for twin axle trailer: Max. 500 kg. vertical pressure

Speed-up gear (540 to 1000 rpm): Increases the tractor rpm from 540 to 1000 rpm

Turning gear: For front mounting

TP CHIP KIT: For uniform biomass chip quality: Sliver breakers type A with 4-fingers (max. opening = 33 x 43 mm) and cover inside upper routing house

Bio oil: Strong and bio-degradable "saturated ester" hydraulics oil

 

Photos are for illustration proposes only. Prices include VAT, exclude any dealer installation and/or freight charges. Freight is ex-Ballydooley, Roscommon Co Roscommon F42DD74. JF Hanley Groundcare reserves the right to change recommended price, design and/or specifications without notice. Errors and omissions excepted.

  • 2 year return to base parts and labour warranty.

  • Delivery/Shipping

    *Please Note while we normally stock this item, due to the different options available the exact spec you wish to order may not always be in stock. If we receive an order we will immediately contact you to inform you if the item is available for immediate dispatch or if it need to be ordered into stock before it can be dispatched. If not in stock please allow 5-7 business days for it to come into stock once ordered.

€18,150.00Price
Sales Tax Included
ENQUIRE HERE!

Send us a message to enquire about this product

Thanks for submitting!