MF350 Mounted Stock Feeder (Sheep Snacker)

MF350 Mounted Stock Feeder (Sheep Snacker)

“SIMPLE & RELIABLE”

The MF350 Mounted Stock Feeder (Sheep Snacker) is an electric drive spaced-drop feeder designed for fitment into a UTV or 4×4 pickup bed. Featuring fully galvanised all-steel construction & electronic operation with high-visibility digital counter ensure the right amount of feed is dispensed, exactly where you want it.

Specifically designed to fit all popular UTV’s, for a simple, robust drop feeder you can rely on.

  • 350 litre capacity spaced drop sheep/cattle feeder
  • Electric operation and digital counter
  • Fully galvanised, robust construction
  • Unique countdown function
  • Offset drop to avoid tow bar
  • Fits all popular UTVs

 

SAVE TIME AND HASSLE

Don’t mess around with bagged feed and troughs, the MF350 Livestock Feeder / Sheep Snacker allows you to drop the right amount of feed in the right place each time.

Drop size is variable from 0.5kg to 2kg (approx), and drop spacing is controlled by the forward speed of the UTV or 4×4. Based on the same running gear as the TF350 Trailed feeder, the drive system and electronics are tried and tested. Furthermore, the control module is interchangeable between mounted and trailed models!

 

PRECISE DIGITAL COUNTER

The digital counter ensure you know exactly how much has been deposited, and allows you to focus on checking stock condition.

Operable as either a count-up timer, from 0 drops upwards, or as a countdown counter, whereby the desired number of drops is set, and the machine will deposit exactly that amount of feed, simply and reliably each and every time. Simple design, quality construction, and galvanised finish for a long lasting, reliable machine.

 

ELECTRONIC DRIVE

The electronic drive system on the MF350 & TF350 stock feeder has few moving parts and only rotates when in operation, reducing wear and tear, and allowing towing over longer distances. All electronic components are IP67 rated, for use in the toughest conditions.

Operation is simple even when wearing thick winter gloves, and the large, brightly backlit display is easy to read even in the worst conditions. The countdown function is ideal for reliably dropping exactly the right amount of feed and freeing the operator to focus solely on checking stock condition. The control unit when off consumes minimal power, so will not flatten batteries if hard-wired onto the towing vehicle.

 

EXCEPTIONALLY STRONG & LIGHTWEIGHT

The MF350 Mounted sheep snacker by Chapman Machinery is designed to be exceptionally strong, yet lightweight enough for use in wet, wintery conditions. The fully galvanised hopper is made from robust 2mm folded steel, for strength yet without being excessively heavy – the entire MF350 weighs around 90kg when empty, allowing you the full 350 litre max feed capacity (depending on UTV load limits)!

The drop deflector allows use with a trailer, depositing the feed on the clean ground between the wheels of the towing vehicle and trailer (if used with a trailer).

 

AVAILABLE OPTIONS

+CA Additional Control Box c/w wiring & mounting plates add €350 + VAT

+ES Extension sides to increase capacity by 250L (approx) * Not suitable for UTVs - 4x4 only add €100 + VAT

 

 

Photos are for illustration proposes only. Prices include VAT, exclude any dealer installation and/or freight charges. Freight is ex-Ballydooley, Roscommon Co Roscommon F42DD74. JF Hanley Groundcare reserves the right to change recommended price, design and/or specifications without notice. Errors and omissions excepted.

 

  • Delivery/Shipping

    *Please Note while we normally stock this item, due to the different options available the exact spec you wish to order may not always be in stock. If we receive an order we will immediately contact you to inform you if the item is available for immediate dispatch or if it need to be ordered into stock before it can be dispatched. If not in stock please allow 5-7 business days for it to come into stock once ordered.

  • Spec

    Technical Specification

    Cutting Width 1.50m

    Weight 310 kg

    Cutting Height 25-225mm

    Rotor RPM 2400rpm

    Deck Steel Thickness 5mm cover, 8mm side plates

    Number of Blades 48

    Engine Power 21hp Honda GX630 V Twin w/ Electric start

    Tyre Size 22x11x8″

    Fuel Tank Capacity 10 Litre

    Belt Size 2 x BX41 Cogged Belts w/ automatic tensioning system

    Rotor Balancing G6.3 Dynamic balanced

     

    The FM150 ATV Flail Mower PRO

    Pro Spec as above plus-

    -23 HP Honda Fuel Injected V Twin

    -Oil Cooled

    Hardened Hammerhead Flails

€2,699.00Price
Sales Tax Included
ENQUIRE HERE!

Send us a message to enquire about this product

Thanks for submitting!